Wuxi Bewis Sensing Technology LLC
Attitude is everything!
Add to Cart
BW-IMU610 Series High-precision micro-mechanical Inertial Measurement Unit
Introduction
BW-IMU610 is a high-precision micro-mechanical electromechanical inertial measurement unit produced by Bewis, a core chip developed and produced nationwide. It can output acceleration and angular velocity information without external signal input. It is suitable for motion, vibration or static, Inertial measurement under various conditions.
Performance index
| Gyro | Resolution | 0.005°/sec |
| Range | ±1080°/sec | |
| Room temperature stability (10s smooth) | ＜10°/h | |
| Full temperature offset repeatability | ＜5°/h | |
| Bias stability at full temperature (GJB 10S) smooth | ＜20°/h | |
| Bias stability at full temperature (ALLAN) | ＜5°/h | |
| Scale factor nonlinearity | ＜300ppm | |
| Scale factor repeatability | ＜50ppm | |
| Accelerometer | Range | ±50g |
| Resolution | 0.4mg | |
| Room temperature stability (10S smooth) | 0.4mg | |
| Zero offset repeatability (6 times) | ＜0.5mg | |
| Maximum output | 500Hz | |
| Start delay | 200ms |
Application
AGV
Unmanned Vehicle
Special vehicles
Assisted driving
FAQ
Q1: Accuracy definition of products
A: RMS accuracy, the accuracy of each product can be traced.Accuracy test report can be provided if required.
Q2: How to select suitable model?
A: Users should check the following points:
a. Single or dual axis?
b. Common protocol, Modbus or CAN?
c. Dynamic or static Application scenarios?
d. Horizontal or vertical installation?
Q3: How to purchase?
A: If you want sample, please purchase on BWSENSING online shop. We accept Paypal/TT/CC.If you purchase in bulk, it is recommended to consult the sales for the best price.
Q4: How long is the warranty period?
A: One year.
Company introduction
Wuxi Bewis Sensing Technology LLC(BWSENSING) is an innovative fast growing company established in 2010. The company was born in The Institute of Microelectronics (IME) of Peking University. We have achieved the top spot in the middle and high-end industry applications in the Chinese market.
From 2019, BWSENSING ® is approved as our global brand.With 10 years experience in the research-design-development and manufacture of a range of Inertial sensor technology, BWSENSING posses the skills, knowledge and experience to provide fully integrated OEM/ODM design and manufacturing services for Inclinometer, Electronic Compass, IMU, AHRS, GNSS/INS and Fiber Optic Gyroscope. As the company co-founder Dr. Guangyi Shi said, we will use the Accurate and Cost-effective sensors to make a greater contribution to the global society for a better IoT world.
